Skil 0735 AA Instruction Manual download pdf (Page 7)

100

• Always ensure that the ventilation openings are kept clear

of debris

AFTERUSE

• Alwaysswitchofftoolanddisconnectplugfrompower

sourcebeforemakingadjustments,changingspools,

cleaningorleavingthetoolunattendedforanyperiod

• Store the tool indoors in a dry and locked-up place, out

of reach of children

EXPLANATIONOFSYMBOLSONTOOL

3Warning! Read the instruction manual

4 Do not expose tool to rain

5 Wear protective glasses

6 Payattentiontotheriskofinjurycausedbyflying

debris (keep bystanders a safe distance away from work

area)

7 Immediately disconnect the plug if the (extension) cord is

damaged or cut through while working

8 Double insulation (no earth wire required)

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• If for any reason the old plug is cut o the cord of this tool, it

must be disposed of safely and not left unattended

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

USE

• Cutting guard 0

- mount cutting guard A as illustrated with round head

screw supplied

! neverusethetoolwithoutcuttingguardA

• Cord restraint !

- hook the loop in the extension cord over restraint B as

illustrated

- pull tight to secure the extension cord

• On/o @

- switch on tool by pressing trigger switch C

- switch o tool by releasing trigger switch C

! afterswitchingoffthetoolthecuttinglines

continuetorotateforafewseconds

- allow the cutting lines to stop rotating before switching

on again

! donotrapidlyswitchonandoff

• Trimming

! ensurethattheredcoverD2isremovedfrom

thelinecuttingbladebeforeusingthetool

! ensurethatthecuttingareaisfreeofstones,

debrisandotherforeignobjects

! starttrimmingonlywhentoolrunsatfullspeed

- start trimming near the mains socket and move away

while working

- cut long grass in layers (always start from the top)

- only trim with the tip of the cutting line

- do not cut damp or wet grass

- prevent the cut grass from clogging the spool (do not

make heavy cuts)

- do not overload the tool

- carefully cut around trees and bushes, so that they do

not come into contact with the cutting lines

- keep the tool away from solid objects in order to

protect the cutting lines against excessive wear

- be aware of the kickback forces that occur when solid

objects are touched

• Holding and guiding the tool #

- for cutting long grass slowly swing the tool from right to

left and vice versa

- for cutting shorter grass tilt the tool as illustrated

- for trimming edges turn the cutting head 180° as

illustrated

- hold tool rmly with both hands, so you will have full

control of the tool at all times

- maintain a stable working position

- always hold the tool well away from your body

• Line feeding $

- tap button F lightly on the ground (preferably on a solid

surface) while the motor is running

- two cutting lines will be released and cut o to the

correct length by line cutting blade G

! ensurethattheredcoverD2isremovedfrom

thelinecuttingbladebeforeusingthetool

! takecareagainstinjuryfromlinecuttingbladeG

- after line feeding always return the tool to its normal

operating position before switching on

- feed the lines regularly to maintain full cutting circle

- when the motor runs without load and no grass is cut,

the cutting lines are worn or broken; rewind the spool

or replace the spool system

• Rewinding spool %

In case the cutting lines fail to protrude from spool cap H

! switchoffthetoolanddisconnecttheplug

- remove spool system from tool and take out spool from

spool cap H

- tightly rewind both cutting lines evenly in layers in

arrow direction

- insert both lines into spool slots X and ensure that they

are securely in place (leave sucient length of line)

- thread both lines through spool holes Y before placing

the rewound spool into spool cap H

! ensurethatthespoolislocatedsecurelyinplace,

thenreleasebothlinesfromslotsXbypulling

themfirmly

- mount spool system onto tool (turnspoolclockwise

untilitclicksintoplace) ^

• Replacing spool system ^

! switchoffthetoolanddisconnecttheplug

- simply remove/mount old/new spool system as

illustrated

- only use SKIL spool system 2610Z01354 with this tool

(damageduetousingotherspoolsystemswillbe

excludedfromthewarranty)

- after replacing the spool system test-run the tool for at

least one minute without load to ensure that the tool is

operating properly

! besuretoolisswitchedoffwhenpluggingin

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Alwaysdisconnectplugfrompowersourcebefore

cleaningand/ormaintenance

• Always keep tool and cord clean (especially the

ventilation slots)

- clean the tool with a damp cloth (do not use cleaning

agents or solvents)

- clean line cutting blade G 2 and cutting guard A after

each use

1 2 3 4 5 6 7 8 9 10 11 12 ... 99 100

Comments to this Manuals

No comments

Skil 0735 AA Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Grass trimmers Skil 0735 AA