Skil 2895 User Manual download pdf (Page 9)

-9-

Operating Instructions

V

ARIABLE SPEED CONTROLLED

TRIGGER SWITCH

Your tool is equipped with a variable speed

trigger switch. The tool speed can be

controlled from the minimum to the maximum

nameplate RPM by the pressure you apply to

the trigger. Apply more pressure to increase

the speed and release pressure to decrease

speed. This accurate speed control enables

you to drill without center punching. It also

permits you to use as a power screwdriver.

Bits are available for driving screws as well as

running bolts and nuts.

FORWARD/REVERSING LEVER &

TRIGGER LOCK

After tool use, lock trigger in

“OFF” position to help prevent

accidental starts and accidental discharge.

Your tool is equipped with a forward/

reversing lever and trigger lock located above

the trigger (Fig. 1). This lever was designed for

changing rotation of the bit, and for locking the

trigger in an “OFF” position.

For forward rotation, (with chuck pointed

away from you) move the lever to the far left.

For reverse rotation move the lever to the far

right. To activate trigger lock move lever to the

center off position.

Do not change direction of

rotation until the tool

comes to a complete stop.

Shifting during

rotation of the chuck can cause damage to the

tool.

ADJUSTABLE CLUTCH

Your tool features 21 clutch settings. Output

torque will increase as the clutch ring, is

rotated from 1 to 20. The drill “ ” position

will lock up the clutch to permit drilling and

driving heavyduty work, and also enables bits

to be changed quickly and easily in the

keyless chuck.

B

RAKE

When the trigger switch is released it activates

the brake to stop the chuck quickly.

This is especially useful in the repetitive

driving and removal of screws.

GEAR SHIFTING

Your tool is equipped with two separate gear

ranges, Hi-torque and High-speed. Hi-torque

provides high-torque and slower drilling

speeds for heavy duty work or for driving

screws. High-speed provides faster speeds for

drilling lighter work. To change speeds slide

switch, to the Hi-torque or High-speed position.

AUXILIARY HANDLE

The auxiliary handle will provide additional

control, support and guidance for the tool. The

handle can be positioned on either side of the

tool. To mount, insert mounting bolt into

mounting hole, and simply thread handle onto

bolt until tight.

BATTERY CHARGED CONDITION

INDICATOR

The battery is equipped with a charged

condition indicator (Fig.1). The indicator lights

shows the charged condition of the battery

during the working process.

By pressing the battery fuel indicator button,

the charged condition can also be checked

when the battery is removed or when the

machine is not in use.

• • • • • When all five lights are illuminated,

this indicates the batter pack is fully charged.

• • • When only three lights illuminate, this

indicates the battery pack is partially charged.

• When only one light illuminates, this

indicates the battery pack is slightly charged.

When no lights illuminate, this indicates the

battery pack is completely discharged.

!

CAUTION

!

WARNING

* NOT AVAILABLE ON ALL MODELS

SM 1619X03409 05-08 5/6/08 2:45 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments